Selection based on installation method: As the installation method for magnets, you can refer to different types of magnets in the magnet product series and choose the installation position suitable for this structure. Due to the fact that magnetic materials made of neodymium and cobalt are solidified from sintered materials, they are not resistant to impact and stress concentration, which needs to be taken into account during installation.

① Please make sure to place the magnet on a flat surface

② If installing a bolt or threaded magnet, please confirm that the holes and screw holes on the magnet are not misaligned

③ Before installing the flat head bolt, please confirm that there is no garbage attached

Selection based on environment: Magnet magnetism may be lost due to temperature. When the usage temperature is higher than room temperature, the magnetism will weaken, and when the temperature decreases, the magnetism will return to its original state. However, it should be noted that when heated to the "Curie temperature", the magnet will completely lose its magnetism. In addition, neodymium magnets undergo surface treatment, and their surface treatment layer may peel off due to adsorption impact or aging, leading to rusting. Therefore, in order to avoid damage to the surface treatment layer, it is necessary to use it carefully and avoid using it in humid environments as much as possible.

Correct storage method: The surface of the magnet continuously generates magnetic force, and as long as it is used without pressure, it can be used for a long time like a permanent magnet. The most suitable method for storing magnets is to attach them to magnetic materials such as iron